Aktuellt datum och tid: sön 25 sep 2022, 10:29


Alla tidsangivelser är UTC + 1 timme [ Sommartid ]




Ny tråd Svara på tråd  [ 4 inlägg ] 
Författare Meddelande
 Inläggsrubrik: 1958 Husqvarna Corona
InläggPostat: lör 07 feb 2009, 16:40 
Drömmare
Drömmare

Blev medlem: lör 07 feb 2009, 16:32
Inlägg: 1
Ort: Neenah, Wisconsin, USA
JAG er sett för en synchroflexrem (CM-25197) för en 1958 Husqvarna Corona ösa.
Kanna någon hjälpa mig?

I am using an online translator to post this message. If you read English, I am restoring a beautiful 1958 Husqvarna Corona and am trying to find a clutch drive belt. I know that these were later converted to chain drive, so would also be interested in a conversion, if I could find one.

thanks

Steve


Upp
Offline Profil  
 

Dela på:

Share on Facebook FacebookShare on Twitter TwitterShare on Tuenti TuentiShare on Sonico SonicoShare on FriendFeed FriendFeedShare on Orkut OrkutShare on Digg DiggShare on MySpace MySpaceShare on Delicious DeliciousShare on Technorati TechnoratiShare on Tumblr TumblrShare on Google+ Google+

 Inläggsrubrik:
InläggPostat: mån 09 feb 2009, 12:33 
Administrator
Administrator
Användarvisningsbild

Blev medlem: fre 23 maj 2003, 19:34
Inlägg: 439
Ort: Stockholm
Sorry, Steve. Can't help you with the clutch belt drive.

But you won't have to bother translating stuff automatically again. That text was pretty unreadable and most people in Sweden read English pretty well.

best of luck

/JM

_________________
Vespa Rally 221 -73
Vespa Primavera 130 -81
Vespa 50S -65
Lambretta LI 150 s1 -59
Isomac Napolissima -05


Upp
Offline Profil  
 
 Inläggsrubrik:
InläggPostat: mån 09 feb 2009, 13:17 
Chefsmontörn
Användarvisningsbild

Blev medlem: fre 29 aug 2003, 19:29
Inlägg: 720
Ort: Nykil
Hi steve! Welcome to the right place!

The transmissionbelt can be ordered from mohlins at 669SEK

http://www.mohlins.se/2006/visa_art.asp?artikel=22762&mod=416&h=9&m=2

send them an e-mail info@mohlins.se

corona was my first moped! I tuned it, and without legshields it starts to wobble, togheter with the brakeless chassie it was a successful combination!
it was interesting being 15 and to tune a crank-case feed engine. We drilled the housing, the sealing plate and the crank. Togheter with a 15 mm BING it was a great effect raise, and a superb engine except from one thing, that f-ing belt! It always went of.
You know that you have to use special oil so the belt dont get wider I hope?
Good luck steve!

Fast regards / Ola

_________________
Autisa -Trimcylindern för bakåtsträvare som vill åka lika fort som förr


Upp
Offline Profil  
 
 Inläggsrubrik: Re: 1958 Husqvarna Corona
InläggPostat: tor 26 feb 2009, 15:07 
58Husky skrev:
I am restoring a beautiful 1958 Husqvarna Corona and am trying to find a clutch drive belt. I know that these were later converted to chain drive, so would also be interested in a conversion, if I could find one.

thanks

Steve

Hi Steve!

I think it's cheaper (and better) to convert the transmission to chain drive. You probably know that there were Husqvarna motors ("The D-motor" or "Egg motor") with chain drive as well?

I have a 1958 Husqvarna Roulette with the same motor as yours, and I have converted it into chain drive instead. You'll just have to find a new clutch basket as well as a new chain sprocket.

Send me a pm and I will help you to get in touch with someone that I presume have the parts you will need.

Regards

/ Fredrik


Upp
  
 
Visa inlägg nyare än:  Sortera efter  
Ny tråd Svara på tråd  [ 4 inlägg ] 

Alla tidsangivelser är UTC + 1 timme [ Sommartid ]


Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 7 gäster


Du kan inte skapa nya trådar i denna kategori
Du kan inte svara på trådar i denna kategori
Du kan inte redigera dina inlägg i denna kategori
Du kan inte ta bort dina inlägg i denna kategori
Du kan inte bifoga filer i denna kategori

Sök efter:
Hoppa till:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net
Swedish translation by Peetra & phpBB Sweden © 2006-2010